DETERMINANTS OF KAIZEN ADOPTION BY SMALL AND MEDIUM ENTERPRISES IN AFRICA: A LITERATURE REVIEW

Authors

  • Margareth A Mapunda

Keywords:

KAIZEN, Lean Manufacturing, TQM, Adoption, 5S, SMEs, TPB Model, Africa

Abstract

Kaizen is a Japanese word meaning a continuous improvement which involves both managers and workers in the workplace using relatively little expenses. The method originated from the United States of America and was imported and modified in Japan after the Second World War to resolve the challenge of scarce resources. Several businesses which adopted Kaizen confirmed its impact in waste reduction and productivity improvement. However, Kaizen adoption rate has been very low in the African countries. Thus, this study synthesizes determinants of Kaizen adoption by Small and Medium Enterprises (SMEs) in African countries. It specifically, assesses Kaizen related components and examines the determinants of Kaizen adoption by SMEs in African countries. A comprehensive review of twelve related empirical literature of African countries practicing Kaizen was assessed. The data were analyzed using Microsoft Excel and those with scores of 50% or above were considered to be significant.  The study found that Total Quality Management (59%), 5S Kaizen (25%), Lean Manufacturing (8%) and Quality Circles (8%) are Kaizen related components adopted by SMEs in twelve African countries. The study also found that, Top Management Commitment and Support (75%) (Attitude and facilitating conditions), Training and Education (67%) (Facilitating conditions), Teamwork, Employees Participation and Empowerment (50%) (self-efficacy) are critical determinants of Kaizen adoption by SMEs in African countries. The study implies that, African countries which practice Kaizen should focus on the Top Management Commitment and Support; Training and Education; Teamwork, Employees participation and Empowerment; as the key significant determinants of Kaizen to accelerate its implementation so as to enhance the SMEs’ productivity and performance

References

Ahmed, S. E., & Yusof, S. R. (2016). Ranking Critical Success Factors for Sustaining Total Quality Management Implementation in Engineering Sector in Sudan. International Journal of Applied Engineering Research, 11(21), 10708-10715.

Ajzen, I. (1991). The Theory of Planned Behavior. Organizational Behavior and Human Decision Process, 50(2), 179-211.

Al-Tayeb, Y. (2015). The Effectiveness of Quality Management Implementation the Impact Factors from Egyptian Managers Perspectives. International Journal of Business Management and Research, 5(4), 39-54.

Arshida, M. M., & Agil, S. O. (2013). Critical Success Factors for Total Quality Management Implementation within the Libyan Iron and Steel Company. ISS & MLB September 24-26, (pp. 254-259).

Ayandele, I. A., & Akpan, A. P. (2015). The Practice, Challenges, and Benefits of Total Quality Management (TQM) in Manufacturing Firms in Nigeria. International Journal of Economics and Business Management, 3 (5), 62-74.

Bwemelo, G. (2014). KAIZEN as a Strategy for Improving SSMEs' Performance: Assessing its Acceptability and Feasibility in Tanzania. European Journal of Business and Management, 6 (35), 79-90.

Bwemelo, G. S. (2017). Acceptability and Feasibility of Kaizen as a Strategy for Improving SSMES Performance in Tanzania. Business Educational Journal, 1 (3), 1-15.

Chin, Y. C. (2016). Consumer Acceptance of Online Complaint Forms: An Integration of TPB, TAM and Values Perspective. Business and Economic Research, 6(2), 265-279.

Edu, S. A. (2013). Total Quality Management Practice among Manufacturing Firms in Ghana. MPhil Thesis, University of Ghana.

Grandón, E. E., & Ramírez-Correa, P. (2018). Managers/owners’ innovativeness and electronic commerce acceptance in Chilean SMEs: a multi-group analysis based on a structural equation model. Journal of theoretical and applied electronic commerce research, 13(3), 1-16.

Hagos, A. M. (2016). Factors and Challenges Affecting Implementation of Continuous Improvement (Kaizen) Tools in Garment Factories).

Imai, M. (2012). Gemba Kaizen: A Common Sense Approach to a Continuous Improvement Strategy (2nd Ed.). Chicago: McGraw Hill.

Ishiwata, A. (2009). Needs for Kaizen Activities by African Manufacturer. Graduate Institute for Policy Studies (GRIPS) Development Forum October 2009 Pg. 13-21.

JICA (2018). Japanese International Cooperation Agency – African Countries Engaged in Kaizen. Retrieved from: https://www.jica.go.jp/english/news/field/2018/180625_01.html

Kamau, S. M. (2012). Determinants for Implementation of Quality Standards (Kaizen) in Flower Industry: A case of Kariki Ltd in Kiambu County. Masters' Thesis, University of Nairobi.

Kikuchi, T. (2009). JICA Supported Projects for Quality and Productivity Improvement in Tunisia. Graduate Institute for Policy Studies (GRIPS) Development Forum October 2009 Pg. 38-54.

Knol, W. H., Slomp, J., Schouteten, R. L., & Lauche, K. (2018). Implementing lean practices in manufacturing SMEs: testing ‘critical success factors’ using necessary condition analysis. International Journal of Production Research, 56(11), 3955-3973.

Kumar, S., Dhingra, A., & Singh, B. (2018). Lean Kaizen Implementation: a Road for Identifying Continuous Improvement opportunities in Indian Small and Medium-sized Enterprise. Journal of Engineering, Design, and Technology, 16 (1), 143-160.

Larteb, Y., Haddout, A., & Benhadou, M. (2015). Successful Lean Implementation: The Systematic and Simultaneous Consideration of Soft and Hard Lean Practices. International Journal of Engineering Research and General Science, 3(2), 1258-1270.

Latip, M., Sharkawi, I., Sharifuddin, J., & Mohamed, Z. (2018). Investigating Owner-Manager’s Intention to Adopt Environmental Management Practices among Food Processing SMEs In Malaysia. International Journal of Entrepreneurship and Management Practices, 1(3), 1-11.

Maarof, M. G., & Mahmud, F. (2016). A Review of Contributing Factors and Challenges in Implementing Kaizen in Small and Medium Enterprises. Procedia Economics and Finance, 35, 522-531.

Mapfaira, H., Mutungi, M., Lefatshe, K., & Mashaba, T. (2014). Manufacturing Adoption and Implementation Barriers in Botswana Manufacturing Companies. International Conference on Advances Marine, Industrial and Mechanical Engineering (ICAMIME) 15th -16th April 2014, Johannesburg – South Africa.

Magasi, C. (2016). Determinants of Customer Loyalty in Sub Saharan African Banking Industry: An Empirical Review. Journal of Economics, Commerce and Management, 4 (2), 574-588.

Matsoso, M. L., & Benedict, O. H. (2015). Critical success factors towards the implementation of total quality management in small medium enterprises: a comparative study of franchise and manufacturing businesses in Cape Town. Investment Management and Financial Innovations, 12 (3), 162-174.

Muriithi, S. M. (2017). Small and Medium Enterprises Contribution, Challenges and Solutions. European Journal of Research and Reflection on Management Science, 5 (1), 36-48.

Nikander, A. (2011). Determinants of Consumer Intentions to Redeem Mobile Coupons. Master's thesis, Aalto University.

Ohno, I., Ohno, K., & Uesu. (2009). Introducing Kaizen in Africa. Graduate Institute for Policy Studies (GRIPS) Development Forum October 2009, Pg. 1-12

Okewu, E. (2015). Enhancing Small and Medium Enterprises (SMEs) in Africa through Service Oriented Software Engineering (SOSE). Covenant University International Conference on African Development Issues (CU-ICADI) 11th -13th May 2015 African Leadership Centre Covenant University, Ota – Nigeria.

Reis, M., Matias, J. C. O. & Azevedo, S. G. (2014). The Importance of Total Quality Management on Customer Satisfaction. Conference: VI Encontro de Investigadores da Qualidade: At Covilha. Retrieved from: https://www.researchgate.net/.../282662789_THE_IMPORTANCE_OF_TOTAL_QUALI.

Rumanyika, J. D., & Mashenene, R. G. (2014). Impediments of E-commerce Adoption among Small and Medium Enterprises in Tanzania: A review. International Journal of Information Technology and Business Management, 32 (1), 45-55.

Sarmah, B., Sharma, S., & Gupta, S. (2017). Antecedents of E-business Adoption Intention: An Empirical Study. International Journal of Innovation Science, 9(4), 417-434.

Seebaluck, A. K., Vencataya, L., & Buldan, A. (2014). Critical Success Factors Affecting Quality Circles Implementation in a Service Sector. A Case of the Luxury Hotels of Mauritius. 26th International Business Research Conference 7-8 April Imperial College. London.

Tiwari, P. (2017). Assessment of the Practices and Challenges of Kaizen Implementation in Micro and Small Enterprises: The Case of Manufacturing Enterprises. International Journal of Engineering and Management Research, 7 (4), 313-322.

Wanderi, E. E., Mberia, H., & Oduor, J. (2015). Evaluation of Determinants for Total Quality Management Implementation in Rwandan Construction Companies: A Case of Fair Construction Company. European Journal of Business and Social Sciences, 4 (3), 14-28.

Zhou, B. (2016). Lean principles, practices, and impacts: a study on small and medium-sized enterprises (SMEs). Annals of Operations Research, 241(1-2), 457-474.

Downloads

Published

2019-11-14

How to Cite

Mapunda, M. A. (2019). DETERMINANTS OF KAIZEN ADOPTION BY SMALL AND MEDIUM ENTERPRISES IN AFRICA: A LITERATURE REVIEW. Business Education Journal, 5(2). Retrieved from http://cbe.ac.tz/bej/index.php/bej/article/view/178

Issue

Section

Social Sciences